Worldwide tracked shipping EUR · USD checkout Built by modders, for modders
HomeBaristaMods
0
Shop by machine -
Confirm
Red Silicone E61 Group Head Gasket (8 mm)
Red Silicone E61 Group Head Gasket (8 mm)
Red Silicone E61 Group Head Gasket (8 mm)
Red Silicone E61 Group Head Gasket (8 mm)

Home  /  non un mucchio di parti.

Red Silicone E61 Group Head Gasket (8 mm)

€3.50 In stock · ships in 24 h

Refresh the seal at the brew head with a red silicone E61 group head gasket sized for machines that use an 8 mm brew head seal. 73 mm outer diameter, 57 mm inner diameter, 8 mm thickness — a practical replacement for leaks around the portafilter, worn rubber, or a loose lock-in feel.

Tracked worldwide shipping · tracked delivery — times in our Shipping Policy
30-day return · unopened kits returnable, no questions asked
Install guide included · step-by-step thermostat swap article on our site
Thickness8 mm
Outer diameter73 mm
Inner diameter57 mm
MaterialRed silicone
Pack quantity1 piece
Red silicone E61 group head gasket showing the beveled ring profile

A cleaner seal, same daily workflow.

The red silicone E61 group head gasket is made for buyers who want a cleaner seal without changing the machine’s daily workflow. The beveled ring profile helps the portafilter seat firmly, while the silicone stays flexible through repeated heat cycles during espresso brewing.

Single red silicone E61 gasket in a protective pouch

One gasket, ready to keep on hand.

Each gasket is packed as one piece in a simple protective pouch. The compact spare is easy to keep in a maintenance drawer, ship with a repair kit, or include with a home espresso upgrade order.

Side profile of the 8 mm thick red silicone E61 gasket

The 8 mm version — check before you order.

This is the 8 mm version of the gasket. Before ordering, confirm your machine uses an 8 mm brew head seal, and check the current gasket if the portafilter locks too far to the side or leaks under pressure.

Red silicone gasket next to an E61 group head for compatibility reference

Made for E61-style brew heads.

Suitable for E61-style brew heads and compatible models that use the same 8 mm gasket size — including listed Gaggia, VBM, Faema E61/E98, and Decent machines. Always match the gasket thickness before installation.

Gasket beside a portafilter, basket, and shower screen during maintenance

Swap it during routine cleaning.

Replace the gasket during routine cleaning when the shower screen is removed. It is a practical time to inspect the old seal, clean coffee oil from the groove, and fit the new gasket before reassembling the brew head.

Hand fitting the red silicone gasket into an E61 brew head groove

Fits into the groove, locks in firm.

Install the gasket into the clean brew head groove with the correct orientation, then lock in the portafilter to check the feel. A proper fit should feel secure without needing excessive force on the handle.

Portafilter with water droplets beside a replacement red silicone gasket

Replace it when the seal starts to leak.

Choose a fresh gasket when water or coffee escapes around the portafilter, the old seal has hardened, or the handle no longer locks in its usual position. A new 8 mm gasket can restore a more stable seal for daily espresso use.

Buyer checks before ordering

Gasket thickness 8 mm
Outer diameter 73 mm
Inner diameter 57 mm
Material Red silicone
Pack quantity 1 piece
Common fit E61-style brew heads and listed machines using an 8 mm seal
Not ideal for Machines needing a different gasket thickness or a non-E61 shape
€3.50 Add to cart